Skip to content

Gqeberha

067 397 3341
Handyman ยท Gqeberha and Port Elizabeth

The list on your
fridge door,
done in one visit.

The sticking door. The cupboard that hangs crooked. The TV that never got mounted. The shelf still in its box. Small repairs and installations across Gqeberha, worked through properly in a single booked slot, for one agreed price.

  • One visit, one invoice
  • Call-out included
  • Whole of Gqeberha
Handyman working with a cordless drill on a home repair job in GqeberhaSample photo

How it is priced

Fixed price per job

Agreed before work starts. No hourly rate and no meter running.

How pricing works

The price before the work

Every job is quoted as a job, in writing, before anything starts. You approve the number while you can still say no, and materials are approved separately.

The whole list in one visit

One trip, one setup, one invoice. Each job is priced on its own, and booking six jobs together spreads the travel across all of them.

Honest about the limit

Work that legally needs a registered plumber or electrician is referred to one. You get told at the start, not halfway through with the water off.

Left clean

Dust swept, packaging stacked, tools gone. The part most people have been burned on before is the part that gets the most attention.

Six focus areas

Waterproofing, roofing,
and everything on the list

The work as Craig describes it. Waterproofing and roofing repairs first, because a leak does not wait, then the general maintenance and the small jobs that keep a house in order. Eleven detail pages sit underneath these six.

Every job is quoted as a job, with the price agreed before work starts rather than run up on a meter. Send the whole list at once and you get a price for each item on it, which is also why a long list prices better than the same jobs booked one at a time.

Every service, page by page

Eleven jobs.
One handyman.

Nine of them are the work that falls between the trades, too small for a specialist to block out a day for and too fiddly to want to spend a Saturday on. The other two are the big ones: roof leaks and waterproofing, quoted per job once the roof has been looked at.

Sealing the joints the water gets through, before it reaches your ceiling.

  • Water ingress traced to the entry point1 to 2 hrs
  • Ridge line sealed along the cappingHalf day
  • Valley cleared, cleaned and sealed2 to 4 hrs
  • Roof penetrations and flashings resealed2 to 3 hrs

A leak found where it gets in, not where the stain shows.

  • Roof leak traced to its entry point1 to 2 hrs
  • Cracked or broken tile replaced1 to 2 hrs
  • Slipped tiles reseated1 to 2 hrs
  • Ridge capping rebedded and made goodHalf day

Straight, level, and fixed into something that will hold it.

  • TV bracket on brick or concrete1 to 1.5 hrs
  • TV bracket on drywall, studs located1 to 2 hrs
  • Full motion or swivel bracket1.5 to 2 hrs
  • Cable trunking to hide the wires1 hr

Sticking, sagging, swinging open, or refusing to lock.

  • Sticking door adjusted at the hinges45 min to 1 hr
  • Door rehung or planed and refitted1.5 to 2 hrs
  • Hinges replaced, including rusted coastal hinges1 hr
  • Latch or striker plate realigned45 min

Doors that hang, hinges that gave up, drawers that jump the rail.

  • Kitchen door rehung on new hinges45 min to 1 hr
  • Hinge plate pulled out of chipboard, repaired1 hr per door
  • Soft close hinges retrofitted15 min per door
  • Drawer runner replaced1 hr

The jobs that need a level line and the right fixing.

  • Curtain rail fitted, standard window1 to 1.5 hrs
  • Long or double rail fitted1.5 to 2 hrs
  • Blinds fitted, including drilling into lintels1 to 1.5 hrs per blind
  • Floating or bracket shelf fitted1 to 1.5 hrs

07 / Assembly

Furniture Assembly

Flat pack out of the box and standing square.

  • Bed base and headboard assembled1 to 1.5 hrs
  • Desk or study unit assembled1 hr
  • Two door wardrobe assembled1.5 to 2 hrs
  • Bookcase, chest of drawers or TV unit45 min to 1 hr

Patches, marks, scuffs and trims, not the whole house.

  • Small patch, filled and painted1 to 2 hrs
  • Scuff and mark touch-ups in a room1 to 2 hrs
  • Door or window trim and frame1.5 to 2 hrs per frame
  • Skirting boards, cleaned and repainted2 to 3 hrs

The list on your fridge door. Bring all of it.

  • Loose handles, knobs and fittings tightened or replaced10 to 20 min each
  • Light fitting or ceiling rose swapped45 min each
  • Gate, door and window hinges eased or replaced45 min each
  • Sliding door or window off its track1 hr

11 / Landlords and agents

Rental and Complex Maintenance

Punch lists worked through before the tenant walks in.

  • Full punch list, small defects3 to 4 hrs
  • Move-in or move-out refreshHalf day
  • Door, cupboard and window adjustments1 to 2 hrs
  • Silicone and sealant renewal2 to 3 hrs

Something not on the list? Send it anyway. Most odd jobs fit.

What it costs

Priced per job.
Quoted before we start.

No hourly rate, no meter running and nothing to multiply out. Send the job and you get a price for that job, fixed before anything begins. The examples here are typical South African market figures for work of that size, so you can judge a quote rather than take one on trust.
How it is priced
Fixed price per job
When you get the price
Before any work starts
Hourly rate
None. No meter running
Materials
Quoted separately, approved by you

A single small job

Under an hour on site
  • A dripping tap washer replaced
  • A cupboard door rehung
Typical labourR280 to R500

A short list

Half a day on site
  • TV bracket on a brick wall
  • Two cupboard doors and a drawer runner
  • A sticking door adjusted
  • Small paint touch-ups
Typical labourR900 to R1,600

A full day

A long list, or a rental turnaround
  • A punch list worked through
  • Doors, cupboards and windows adjusted
  • Silicone redone in a bathroom
  • Paint touch-ups after a move out
Typical labourR1,600 to R2,800

Market figures, not a Craig's Handyman price list. Labour only. Materials and fittings are quoted separately and approved by you before anything is bought. The useful lesson in them is about batching: one visit covering six jobs prices far better than six separate visits, because the travelling and the setting up happen once instead of six times.

Prices shown here are typical South African market figures for this kind of work, not Craig's own numbers, and are not yet confirmed by him. To be locked in before launch.

How it works

Three steps, no mystery

The main reason people put off a handyman is not the money. It is not knowing what happens after you send the message.
01

Send the list

WhatsApp the jobs, with photos of anything unusual. Five items or twenty five, it does not matter. A photo of a problem is worth more than a paragraph describing it.

02

Get a price and a time

You get an honest answer on which jobs fit and how long the visit should take, plus a price. If something on the list needs a specialist trade, you hear that up front rather than on the day.

03

One visit, one invoice

The whole list gets worked through in a single slot, in a sensible order. Materials are approved before they are bought, and the number on the invoice is the number you agreed to.

Hand tools laid out ready for a day of small repairsSample photo
Who turns up

A handyman who says no when it matters

Craig does the work himself, which means the person who quotes the job is the person standing in your kitchen doing it.

The important part is what does not get done. Anything that legally needs a registered plumber or electrician gets referred to one. It is a smaller invoice for that visit and the honest answer, and it is the difference between a handyman and someone who will have a go at anything.

  • Works on the job, not a call centre
  • Quotes before starting, always
  • Refers out registered-trade work
  • Cleans up before leaving
  • Own tools and fixings on board
  • Straight answer on travel time
Landlords ยท Agents ยท Complexes

Punch lists worked through before the tenant walks in

A rental turnaround has a date that does not move. Send the inspection report or your own list, get a price for the visit, and get an itemised account of what was completed and what needs a specialist.

Complex access sorted in advance

Most metro complexes now require contractors to sign a POPIA compliant access register at the gate, and some restrict noisy work to set hours. Send the unit number and the gate procedure with the booking and the visit does not stall at the boom.

Reconciled against the report

Completed items are listed against the invoice so it can be checked off against the inspection report without a phone call.

What a turnaround covers

  • Doors, cupboards and windows adjusted
  • Sliding tracks and rollers
  • Silicone and sealant renewal
  • Blinds, rails and fittings
  • Small plumbing fittings
  • Paint touch-ups after a move out
Send a punch list
Gqeberha and Port Elizabeth

Where the work happens

The whole city, roughly west to east, from the coast out to the northern suburbs. Send the suburb when you book and you get a straight answer on travel.

Beachfront and south

Salt air does not forgive lazy work. Coastal homes here deal with corrosion on gate hardware, rusted hinges and paint that lifts. Coastal repairs get stainless or galvanised fixings by default.

SummerstrandHumewoodMill ParkWalmerWalmer HeightsLovemore HeightsSchoenmakerskopSardinia Bay

Central and inner suburbs

Older housing stock, so the work is mostly tired fittings rather than new damage. Sticking doors, worn hinges and old cupboard catches are the everyday job here.

Newton ParkCharloMount CroixSt George's ParkCentralNorth EndSidwellSydenhamKensingtonAdcockvale

Northern suburbs

Family homes and the bulk of the rental stock. This is where punch lists, landlord turnarounds and move-in repairs concentrate.

LorraineSherwoodFramesbySunridge ParkKabega ParkWesteringCotswoldPari ParkRowallan ParkMalabarAlgoa ParkFairviewGreenbushes

Bluewater Bay and the north coast

Further out, so visits get planned rather than squeezed in. Book a proper list and it is worth the drive for both of us.

Bluewater BayAmsterdamhoekSeaviewBeachviewChelsea

Straight answers

The questions people actually ask

Including the ones with an awkward answer.
What does a handyman in Gqeberha actually do?

The jobs that fall between trades. Doors that stick, cupboard doors that hang, TV brackets, curtain rails and shelves, flat pack furniture, dripping taps, silicone that has gone black, and small paint touch-ups. Plus roof leaks and waterproofing on tiled roofs. Anything that legally needs a registered plumber or electrician gets referred to one instead.

Can a handyman fix a roof leak?

On a tiled roof, yes. The leak gets traced to where the water actually enters, then the cause gets fixed: a cracked or slipped tile replaced, ridge capping rebedded, a valley cleared and resealed, a flashing closed up again. Flat roofs, concrete slab roofs, parapets, balconies, re-roofing and anything above single storey need a roofing contractor instead, and you get told that rather than quoted for it. Roof work is quoted per roof, once it has been looked at.

How much does it cost?

Every job is quoted as a job rather than by the hour, and you get the price before any work starts. The pricing page carries typical 2026 market ranges for the common jobs, clearly labelled as market figures rather than Craig's own prices, so you have something to judge a quote against. The quote itself is the number that counts.

Is there a minimum charge?

There is no hourly rate and no minimum-hours charge to work around, which was the whole point of pricing per job. A twenty minute job gets a price for a twenty minute job instead of two hours you did not use, and a long list gets quoted job by job so you can drop items without renegotiating the rest.

Can a handyman do plumbing and electrical work in South Africa?

Small maintenance on existing fittings, yes. Anything that forms part of the fixed water installation, including pipework and geysers, must be done by a qualified plumber, and fixed electrical work needs a registered electrician. Those jobs get referred out rather than bodged, and you get told straight away.

How do I get a quote?

Send the job, or the whole list, on WhatsApp with photos of anything unusual. Most jobs can be priced from a photo. Anything that needs eyes on it before it can be priced honestly gets looked at first, and the written quote follows. Nothing is booked and nothing starts until you approve the number.

Which areas of Gqeberha do you cover?

The whole city, from Summerstrand and Walmer through to Newton Park, Lorraine, Framesby, Westering, Algoa Park and out to Bluewater Bay. Send the suburb when you book and you will get a straight answer on travel.

Do you bring your own tools?

Yes, all standard hand tools and a cordless drill with the bits for masonry, timber and tile. Materials and fittings are quoted separately and approved before anything is bought, so you are never handed a bill for parts you did not agree to.

What if the job turns out to be bigger than it looked?

Work stops and you get told. Every trade has jobs that only reveal themselves once something is open or off the wall. The rule is simple: no surprise on the invoice. The quote changes only if you approve the change.

Send the list. Get a price. Get it done.

One or twenty jobs, it makes no difference. The more you put on the list, the better the visit works out.

WhatsApp your listCall 067 397 3341

No price is agreed until you approve it

Call nowGet a quote